Rack-mountable
Showing 1–15 of 1468 resultsSorted by popularity
-
Cisco Network Switches, Network Switches
WS-C2950SX-48-SI Cisco Catalyst 2950 48-Ports 2 Port 1000 Base SX Switch
Cisco Network Switches, Network SwitchesWS-C2950SX-48-SI Cisco Catalyst 2950 48-Ports 2 Port 1000 Base SX Switch
WS-C2950SX-48-SI Overview
The Cisco Catalyst is a 1U rack‑mountable, Layer 2 manageable switch offering 48 autosensing 10/100 Mbps RJ‑45 ports and 2 fixed Gigabit 1000BASE‑SX fiber uplinks, running Cisco’s Standard Image firmware. Designed for cost-effective edge deployment in small or mid-sized networks, it delivers wire-speed switching with a non-blocking fabric up to ~13.6 Gbps, forward rates up to ~10.1 Mpps, and supports up to 8,000 MAC addresses. Additional features include VLAN support, 802.1p QoS, SNMP/RMON monitoring, Web-based Device Manager, Cisco Express Setup.
SKU: WS-C2950SX-48-SI -
Cisco Network Switches, Network Switches
WS-C2950ST-24-LRE Cisco Catalyst 24-Ports Long Reach Ethernet Switch EI
Cisco Network Switches, Network SwitchesWS-C2950ST-24-LRE Cisco Catalyst 24-Ports Long Reach Ethernet Switch EI
WS-C2950ST-24-LRE Overview
The Cisco Catalyst is a Layer 2 managed switch offering 24 Long-Reach Ethernet (LRE) ports, capable of transmitting over existing telephone-grade copper wiring at distances up to 1,524 meters (5,000 ft) and speeds ranging from 2 to 15 Mbps, alongside 2 fixed 10/100/1000Base-T uplink ports and 2 SFP uplink slots, of which any two can be active at once for flexible Gigabit connectivity. Running Cisco’s Enhanced Image software, it supports VLANs, Spanning Tree (PVST+), ACLs, QoS, SNMP/RMON, and even port‑based 802.1X authentication—features typically reserved for enterprise-class deployments.SKU: WS-C2950ST-24-LRE -
Cisco Network Switches, Network Switches
WS-C2950C-24 Cisco Catalyst RJ-45 Rack-mountable Catalyst Autosensing Switch
Cisco Network Switches, Network SwitchesWS-C2950C-24 Cisco Catalyst RJ-45 Rack-mountable Catalyst Autosensing Switch
WS-C2950C-24 Overview
The Cisco Catalyst‑24 is a fixed-configuration, Layer 2 managed switch that provides 24 autosensing 10/100 Mbps copper ports, plus 2 fixed 100Base‑FX fiber uplink ports, ideal for legacy small to mid-sized Ethernet deployments. It achieves wire-speed performance at approximately 3.9 Mpps forwarding rate and about 8,000 MAC address entries, running either the Standard or Enhanced IOS image depending on the model configuration. The 2950C‑24 supports essential enterprise features such as VLANs, 802.1p QoS, SNMP/RMON monitoring, link aggregation, and basic security controls. While it’s a reliable workhorse for its time, supporting wired access connectivity efficiently.
SKU: WS-C2950C-24 -
Cisco Network Switches, Network Switches
WS-C2948G-GE-TX Cisco Catalyst 1Gbps 48-Ports Switch Ethernet 10/100/1000 4SFP
Cisco Network Switches, Network SwitchesWS-C2948G-GE-TX Cisco Catalyst 1Gbps 48-Ports Switch Ethernet 10/100/1000 4SFP
WS-C2948G-GE-TX Overview
The Cisco Catalyst is a 1U rack-mountable, Layer 2 managed Gigabit Ethernet switch featuring 48 auto-sensing 10/100/1000Base‑T RJ‑45 ports and 4 fixed SFP uplink slots, providing flexible copper or fiber uplink connectivity. It delivers a non‑blocking switch architecture with approximately 22 Gbps switching capacity and supports up to 8,000 MAC address entries, offering reliable wire-speed performance across all ports. The switch includes 64 MB RAM and 16 MB flash memory, supports VLANs, QoS with IEEE 802.1p, SNMP/RMON-based monitoring, and Cisco management via CLI or web console, making it suitable for enterprise access or distribution deployments.
SKU: WS-C2948G-GE-TX -
Cisco Network Switches, Network Switches
WS-C2948G Cisco LAN Switch Catalyst 2948G 48-Ports 10/100TX RJ45 2 1000xSlots GBIC
Cisco Network Switches, Network SwitchesWS-C2948G Cisco LAN Switch Catalyst 2948G 48-Ports 10/100TX RJ45 2 1000xSlots GBIC
WS-C2948G Overview
The Cisco Catalyst is a 1U rack‑mountable managed switch offering 48 10/100 Mbps Fast Ethernet RJ‑45 ports and 2 SFP-based Gigabit fiber uplink slots for flexible network connections. It delivers a fully non-blocking architecture with a shared memory switching fabric of approximately 22 Gbps, and supports up to 8,000 MAC address entries, making it well-suited for enterprise access or distribution layer deployments. Running Cisco’s Catalyst IOS or CatOS (depending on software version) with support for VLANs, QoS (802.1p), SNMP/RMON monitoring, and EtherChannel, the WS‑C2948G can also participate in layer‑2 aggregation designs. It operates at up to 130 W power usage, and supports dual airflow configurations depending on chassis and data center layout.
SKU: WS-C2948G -
Cisco Network Switches, Network Switches
WS-C2924-XL-EN Cisco 24-Ports 10/100 Switch Enterprise Edition AC Power
Cisco Network Switches, Network SwitchesWS-C2924-XL-EN Cisco 24-Ports 10/100 Switch Enterprise Edition AC Power
WS-C2924-XL-EN Overview
The Cisco Catalyst is a legacy Layer 2 managed Fast Ethernet switch in the 2900 XL Series, offering 24 autosensing 10/100 Mbps RJ‑45 ports along with optional modular uplinks via expansion slots. Built for early SMB and enterprise wiring closets, it supports SNMP and RMON monitoring, VLANs, IEEE 802.1p QoS, and basic command-line or web-based management. The switch delivers around 3.6 Gbps switching capacity and approximately 2.7 Mpps forwarding, powered by 8 MB DRAM and 4 MB flash memory, and is housed in a compact 1U form factor (~1.7 inches tall) with a rugged metal chassis.
SKU: WS-C2924-XL-EN -
Cisco Network Switches, Network Switches
WS-C2360-48TD-S Cisco Catalyst 2360 Series 48-Ports rack-mountable Switch
Cisco Network Switches, Network SwitchesWS-C2360-48TD-S Cisco Catalyst 2360 Series 48-Ports rack-mountable Switch
WS-C2360-48TD-S Overview
The Cisco WS‑C2360‑48TD‑S is a 1U rack‑mountable top-of-rack Layer 2 switch offering 48 fixed Gigabit Ethernet ports and 4 fixed 10 Gbps SFP+ uplinks, designed for high-performance server aggregation in data center environments. It features a non-blocking, low-latency architecture with 88 Gbps switching capacity, support for up to 8,000 MAC address entries, and reversible airflow (front-to-back or back-to-front) with redundant fan and power options for flexible thermal deployment. Running LAN Lite software tailored for ToR use, it provides basic VLAN support, SNMP/RMON management, Cisco EnergyWise power efficiency, and integration with Cisco Network Assistant or LMS for simplified configuration.
SKU: WS-C2360-48TD-S -
Dell Network Switches, Network Switches
V4HK1 Dell Networking Switch 48 Ports Managed Rack-Mountable
V4HK1 Overview
The Dell Networking (model V4HK1) is a reliable 1U rack-mountable Layer‑2 managed Gigabit Ethernet switch featuring 48 RJ‑45 Gigabit ports (10/100/1000Base‑T) and 4 dedicated 10 Gb SFP+ uplink ports, delivering PoE+ support across all 48 access ports (up to 30 W per port). This switch offers a 176 Gbps non-blocking switching fabric and a forwarding rate of approximately 130.95 Mpps, making it suitable for high-density deployment. Key features include support for up to 4096 VLAN IDs, robust VLAN segmentation, QoS, link aggregation, and access control lists. It supports flexible management via Web GUI, CLI, USB console, and SNMP, ensuring granular administrative control. Available refurbished with an eco-conscious design and efficient power usage.
SKU: V4HK1 -
Dell Network Switches, Network Switches
V33V6 Dell Networking 48xPorts PoE+ Ports Layer3 Managed 1U Gigabit Ethernet Switch
Dell Network Switches, Network SwitchesV33V6 Dell Networking 48xPorts PoE+ Ports Layer3 Managed 1U Gigabit Ethernet Switch
V33V6 Overview
The Dell PowerSwitch (V33V6) is a rack‑mountable 1U Layer 3 managed Gigabit Ethernet switch offering 48 PoE+ auto-sensing 10/100/1000 Mbps RJ‑45 ports and 2 fixed 10 Gb SFP+ uplink ports, along with 2 rear stacking ports that support up to ~84 Gbps through combined stacking. With a full-duplex switch fabric of 220 Gbps and forwarding capacity of ~164 Mpps, it delivers robust performance and supports up to 600Gbps stacking across 12 units from a single IP address.
SKU: V33V6 -
Cisco Network Switches, Network Switches
UCS-SP8-B-FI96 Cisco Switch 48-Ports Manageable Layer 3 Rack-mountable
Cisco Network Switches, Network SwitchesUCS-SP8-B-FI96 Cisco Switch 48-Ports Manageable Layer 3 Rack-mountable
UCS-SP8-B-FI96 Overview
The Cisco UCS‑SP8‑B‑FI96, often listed under the part number UCS-SP8-B-FI96, is essentially a licensed configuration of the UCS 6296UP Fabric Interconnect, tailored to enable up to 18 unified 10 Gigabit SFP+ / FCoE ports (out of a possible 48 ports) on a 2U rack-mountable managed switch.
This interconnect delivers a high-performance 1920 Gbps (1.92 Tbps) non-blocking switching capacity with deterministic, low-latency architecture—designed to consolidate SAN and LAN traffic over a unified fabric in Cisco UCS domains. It offers robust enterprise features including 32,000 MAC address entries, eight hardware QoS queues per port, jumbo frame support (~9 KB), and Data Center Bridging protocol support for lossless Ethernet environments.SKU: UCS-SP8-B-FI96 -
Cisco Network Switches, Network Switches
UCS-SP-FI48P Cisco PoE+ Rack-mountable 1U with 10 Gigabit / FCoE SFP+ Switch
Cisco Network Switches, Network SwitchesUCS-SP-FI48P Cisco PoE+ Rack-mountable 1U with 10 Gigabit / FCoE SFP+ Switch
UCS-SP-FI48P Overview
The Cisco also referred to as the SmartPlay Select, is a compact 1U Fabric Interconnect offering up to 48 unified 10 Gb SFP+ ports with support for Ethernet, FCoE, or 1/2/4/8 Gb Fibre Channel depending on configuration. Providing up to 960 Gbps of throughput, it serves as a converged SAN/LAN backbone for Cisco UCS environments, efficiently consolidating data and storage traffic on a single fabric. Managed exclusively via Cisco UCS Manager in active/passive pairs, the unit supports unified access, VM-aware networking (VM‑FEX), and full UCS domain control. It includes one 1 Gb RJ‑45 management port, hot-swappable fan and power modules, front-to-back airflow, and port licensing flexibility up to 12 enabled ports included, with pay-as-you-go options for expansion/modules.
SKU: UCS-SP-FI48P -
Cisco Network Switches, Network Switches
UCS-HX-FI48P Cisco Rack-mountable Fibre Channel Switch with 32x SFP+ and SFP Slots
Cisco Network Switches, Network SwitchesUCS-HX-FI48P Cisco Rack-mountable Fibre Channel Switch with 32x SFP+ and SFP Slots
UCS-HX-FI48P Overview
The Cisco is a 1U rack‑mountable, Layer 3 managed fabric interconnect specifically tailored for Cisco UCS HyperFlex deployments. It features 12 built-in unified Fibre Channel ports (1/2/4/8 Gbps) and one 10/100/1000 Mbps RJ‑45 management interface, along with up to 32 SFP+ expansion slots—supporting 10 Gb Ethernet, FCoE, or Fibre Channel functionality—to reach as many as 48 unified ports depending on expansion module configurations. With a non‑blocking switching throughput of 960 Gbps, it consolidates SAN and LAN traffic into a unified fabric for efficient virtualization-aware networking. Managed via UCS Manager in a highly available active/passive pair.
SKU: UCS-HX-FI48P -
Cisco Network Switches, Network Switches
UCS-FI-6296UP-CH2 Cisco Fabric Interconnect Switch 48 Ports Managed
Cisco Network Switches, Network SwitchesUCS-FI-6296UP-CH2 Cisco Fabric Interconnect Switch 48 Ports Managed
UCS-FI-6296UP-CH2 Overview
The Cisco is a high‑density, enterprise-grade Layer 3 managed fabric switch in a 2U rack-mount chassis. It provides 48 fixed SFP+/10 Gb Ethernet/FCoE/Fibre Channel ports and supports up to 96 active unified ports via three optional expansion modules, combined offering up to 1,920 Gbps non-blocking switching capacity and ultra-low latency. Managed exclusively through Cisco UCS Manager, these devices serve as the centralized SAN/LAN fabric backbone for UCS B/C Series servers, enabling unified LAN/SAN connectivity, VMware VM-FEX support, and full Fibre Channel over Ethernet (FCoE) functionality while preserving existing native FC networks.
SKU: UCS-FI-6296UP-CH2 -
Cisco Network Switches, Network Switches
UCS-FI-6296UP Cisco 96-Ports SFP+ Rack-mountable 10-Gigabit/FCoE Managed Switch
Cisco Network Switches, Network SwitchesUCS-FI-6296UP Cisco 96-Ports SFP+ Rack-mountable 10-Gigabit/FCoE Managed Switch
UCS-FI-6296UP Overview
The Cisco is a 2‑rack‑unit Layer 3 managed fabric interconnect engineered for Cisco UCS environments, providing 48 fixed 10 Gb Unified SFP+ ports, with support for an additional up to 48 ports via three modular expansion slots—totaling up to 96 active interfaces capable of Ethernet, FCoE, or native Fibre Channel connectivity. With a 1920 Gbps switching capacity, ultra-low latency architecture, and support for lossless Ethernet, it consolidates both LAN and SAN traffic in a unified, high-performance fabric. The unit includes dual redundant fan modules and power supplies, supports jumbo frames up to 9216 bytes, a MAC address table with 32K entries, 8 hardware QoS queues per port.
SKU: UCS-FI-6296UP -
Dell Network Switches, Network Switches
TRJ78 Dell PowerConnect 24-Ports 10 Gigabit Ethernet SFP+ Switch
Dell Network Switches, Network SwitchesTRJ78 Dell PowerConnect 24-Ports 10 Gigabit Ethernet SFP+ Switch
TRJ78 Overview
The Dell PowerConnect 8132 is a 1U rack-mountable, Layer 3 managed switch that provides 24 fixed 10 GBase‑T copper ports, each capable of operating at 10 Gbps, alongside optional support for up to six 40 GbE QSFP+ uplink modules, enabling expansion of fiber connections or higher-speed transit links. It delivers an impressive switch fabric capacity of up to 840 Gbps and supports line-rate forwarding at approximately 960 Mpps, making it ideal for server aggregation and backbone connectivity
SKU: TRJ78
