Out of stock
UNISLDSHF19M StarTech 2U Adjustable Vented Sliding Rack Shelf
UNISLDSHF19M Overview
StarTech 2U Adjustable Vented Sliding Rack Shelf.The lets you add a vented, sliding shelf with cable management into a 4-post server rack or cabinet. The adjustable mounting depth design allows the shelf to be installed into server cabinets with mounting depths from 27.7 to 31.6". Offering a weight capacity of up to 125 lb, this sliding rack shelf features a ventilated, cold-rolled steel construction for increased airflow and durability in your server room or wiring closet installations. For ease in routing cables neatly through your rack, a reversible cable management arm is included and can be attached to the back of the shelf, as well as an adjustable bezel to keep your equipment where you want it on the shelf.Out of stock
RACK-KIT-T1= Cisco rack mounting kit
RACK-KIT-T1= Overview
Cisco rack mounting kit.The Cisco rack mounting kit is an essential tool for anyone looking to secure their network accessories efficiently and reliably. Crafted with versatility in mind, it supports various rack sizes including 19", 23", and 24" (48.3, 58.4, and 61 cm), ensuring a perfect fit for different spatial needs. This mounting kit is not only compatible with PC systems for a smooth setup but also meets ETSI standards, highlighting its commitment to reliability and safety. Whether you're setting up a new network or upgrading an existing one, the Cisco rack mounting kit offers a straightforward solution for securing your network componentOut of stock
PZLRB4P4EP Panduit 4-Post 4RU Overhead
PZLRB4P4EP Overview
Panduit 4-Post 4RU Overhead.It occupies 4 rack units (4U) of vertical space in the rack. Each rack unit (U) is equivalent to 1.75 inches (44.45 mm) in height, so a 4U bracket kit would be approximately 7 inches (177.8 mm) tall.The brackets are typically made from durable materials such as steel or aluminum, ensuring stability and support for the mounted equipment or accessories. This construction also allows for the bracket kit to withstand the weight of installed equipment.Out of stock
CPAC-RAIL-EXT-L Check Point rack slide rail kit
CPAC-RAIL-EXT-L Overview
Check Point rack slide rail kit.Check Point security gateway appliances are built with flexibility and expansion capability to meet the diverse requirements in any enterprise networks.The "EXT" in the model number suggests that these rails are designed to extend or slide out, making it easier to access and service the appliance without fully removing it from the rack.Out of stock
SRSHELF4PHDTM Tripp Lite 4-Post Rack Enclosure Fixed Heavy Duty
SRSHELF4PHDTM Overview
Tripp Lite 4-Post Rack Enclosure Fixed Heavy Duty.Out of stock
1922-3-100-02 Kendall Howard 2U Rack Mountable Drawer
1922-3-100-02 Overview
Kendall Howard 2U Rack Mountable Drawer.The Kendall Howard rack mountable drawer provides a secure space within your rack or cabinet for storing files, electronics, software, cables, testers, and more. By storing equipment within the rack, you'll save time running back and forth to retrieve it. The locking drawer will ensure your peripherals are protected from damage or unauthorized tampering.Out of stock
1922-3-400-01 Kendall Howard Vented Rack Mountable Sliding Shelf
1922-3-400-01 Overview
Kendall Howard Vented Rack Mountable Sliding Shelf.Kendall Howard manufactures the great model of sliding rack shelf, holding up to a 100 lbs. The sliding rack shelf is perfect for servers, keyboards, KVMs, switches, or any other component that you want the ability to slide out, either for convenience or to access the back of the equipment.Out of stock
WG18FRTBBL Panduit steel and is black powder coated
WG18FRTBBL Overview
Panduit steel and is black powder coated.It is constructed from steel and features a black powder-coated finish. This construction provides durability and protection against environmental factors, making it suitable for both indoor and outdoor installations.Out of stock
S52SPSEW Panduit 45 RU x 1200mm enhanced Side Panel
S52SPSEW Overview
Panduit 45 RU x 1200mm enhanced Side Panel.The indicates that this side panel is intended for a 52U high cabinet. Each rack unit (RU) is approximately 1.75 inches (44.45 mm) in height, so a 52U cabinet would be about 91 inches (2311.4 mm) high. The side panel has a depth of 1200mm (approximately 47.24 inches). This depth is important as it matches the depth of the cabinet it is designed for, ensuring a proper fit and alignment.Out of stock
TLBPBPT1S Panduit Tool-less blanking panel
TLBPBPT1S Overview
Panduit Tool-less blanking panel.As the name suggests, this blanking panel features a tool-less installation design, allowing it to be installed and removed quickly and easily without the need for additional tools. This simplifies maintenance and reconfiguration tasks.The typically occupies 1 rack unit (1U) of vertical space in a standard 19-inch server rack. Each rack unit (U) is equivalent to 1.75 inches (44.45 mm) in height. It is constructed from durable materials, such as plastic or metal, ensuring durability and longevity in data center environments.Out of stock
RKPNLTL2U StarTech.com 2U Blank Panel
RKPNLTL2U Overview
StarTech.com 2U Blank Panel.It occupies 2 rack units (2U) of vertical space in the server rack. Each rack unit (U) is equivalent to 1.75 inches (44.45 mm) in height, so a 2U blank panel would be approximately 3.5 inches (88.9 mm) tall.Using blank panels helps maintain a neat and organized appearance within the server rack while improving the overall airflow management. By filling empty spaces, they enhance the efficiency of cooling systems and contribute to the longevity of rack-mounted equipment.Out of stock
