4-PACK-FET-40G Overview

QSFP transceiver module
40 Gigabit LAN
QSFP
for P/N: N7K-F312FQ-25
N7K-F312FQ-25++=
N7K-F312FQ-25=
N7K-F312FQ-25-RF
N7K-M206FQ-23L-RF

 DWDM-SFP10G-31.90 Overview

The Cisco 10GBASE Dense Wavelength-Division Multiplexing (DWDM) SFP+ modules allow enterprises and service providers to provide scalable and easy-to-deploy 10-Gigabit LAN, WAN, and optical transport network (OTN) services in their networks.

 DWDM-SFP10G-36.61 Overview

The Cisco 10GBASE Dense Wavelength-Division Multiplexing (DWDM) SFP+ modules allow enterprises and service providers to provide scalable and easy-to-deploy 10-Gigabit LAN, WAN, and optical transport network (OTN) services in their networks.

 DWDM-SFP10G-40.56 Overview

The Cisco 10GBase Dense Wavelength-Division Multiplexing (DWDM) SFP+ module allows enterprises and service providers to provide scalable and easy-to-deploy 10-Gigabit LAN, WAN, and optical transport network (OTN) services in their networks.

 DWDM-SFP10G-51.72 Overview

The Cisco 10GBASE Dense Wavelength-Division Multiplexing (DWDM) SFP+ module allow enterprises and service providers to provide scalable and easy-to-deploy 10-Gigabit LAN, WAN, and optical transport network (OTN) services in their networks.

 EXP-1GSFP-T Overview

SFP (mini-GBIC) transceiver module
GigE
1000Base-T

 GLC-FE-100LX Overview

The Cisco 100BASE-LX10 SFP (GLC-FE-100LX) operates on ordinary single-mode fiber-optic (SMF) link spans up to 10 kilometers long.

 ONS-CCC-100G-20 Overview

Product Description
Cisco network cable – 20 m
Type
Network cable
Technology
Fiber optic
Type of Fiber Optics
Multimode
Length
20 m
Connector
MPO multi-mode – male
Connector (Second End)
MPO multi-mode – male
Designed For
ONS 15454

 ONS-SC-2G-40.5 Overview

The Cisco ONS 2.5-Gbps fixed-rate OC-48/STM-16 DWDM optics provide both transmit and receive optical interfaces in a single SFP footprint pluggable into any of the four ASAP 4-PIO slots. Each port interface operates at the standard SONET/SDH (Telcordia GR-253-CORE, ITU G.703 and ITU-T G.694.1) 2488.32-Mbps bit rate. The Cisco ONS 2.5-Gbps fixed-rate OC-48/STM-16 DWDM SFP uses a duplex LC connector on the SFP faceplate that is routed through a fiber tray on to the cable-routing module for termination. The Cisco ONS 2.5-Gbps fixed-rate DWDM SFP carries both concatenated payloads of STS-3c/VC-4, STS-6c/VC-4-2c, STS-9c/VC-4-3c, STS-12c/VC-4-4c, STS-24c/VC-4-8c, and STS-48c/VC-4-16c and nonconcatenated payloads on an STS-1 basis. In SONET mode, each optical port can be provisioned as STM-16 to enable the tunneling of SDH payloads in the form of STS-Nc concatenated payload over a SONET network. This helps enable North American service providers to transport SDH traffic from international cable landing points to customer sites. When operated within the outlined specifications (refer to Table 5), each port interface transports a 2.5-Gbps signal with a minimum BER of 10E-12. The Cisco ONS 2.5-Gbps fixed-rate OC-48/STM-16 DWDM SFP provides 32 wavelengths in the ITU-T G.694.1 C-Band channel plan.

 PK-GLC-LH-SM Overview

 QSFP-100G-AOC2M Overview

100GBase direct attach cable
QSFP to QSFP
2 m
fiber optic
active
for P/N: C9500-32C-EDU
C9500-32QC-EDU
N3K-C3636C-R=
N9K-X9788TC-FX-RF
NCS-5502-FLTR-FW

 QSFP-H40G-AOC30M Overview

Cisco QSFP to QSFP copper direct-attach cables are suitable for very short distances and offer a flexible way to connect within racks and across adjacent racks. Active optical cables are thinner and lighter, which makes cabling easier. Active optical cables enable efficient system airflow and have no EMI issues, which is critical in high-density racks.