MPC7E-MRATE-RTU Juniper 12xQSFP+/QSFP28 Multirate Port Line Card
MPC7E-MRATE-RTU Overview
12xQSFP+/QSFP28 multirate port line card, full scale L2/L2.5 features, reduced scale L3,up to 2M routes in FIB,up to 6M routes in RIB, and up to 32 L3VPN instances per card. 4 ports out of 12 support QSFP28. Licensed for 6 ports (2xQSFP28).
$90,999
MPC7E-MRATE-RTU Technical Specifications
Juniper 12xQSFP+/QSFP28 Multirate Port Line Card
Manufacturer :Netscreen
Brand :Juniper, Juniper Networks
Product Line :Juniper Networks
Packaged Quantity :1
Networking
Type :Expansion module
Form Factor :Plug-in module
Connectivity Technology :Wired
Features :Layer 2.5 switching, Layer 3 switching, Layer 2 switching
Ports
Qty :12
Type :100 Gigabit QSFP28 / 40 Gigabit QSFP+
Interface Provided
Interfaces :12 x 100Gb Ethernet – QSFP28/QSFP+
Miscellaneous
Color Category :White
Related products
-
Juniper Expansion Modules
JX-2E1-RJ48-S Juniper Networks Dual-port E1 Physical Interface Modules
JX-2E1-RJ48-S Overview
The Juniper Dual-port E1 PIM provides the physical connection to E1 network media type, receiving incoming packets from the network and transmitting outgoing packets to the network. The Juniper Dual-port E1 PIM is equipped with a dedicated network processor that forwards incoming data packets to the Routing Engine, and receives outgoing data packets from the Routing Engine. During this process, the PIM performs E1 framing and line-speed signaling.SKU: JX-2E1-RJ48-S -
Juniper Expansion Modules
MPC2E-3D-NG-Q Juniper Networks expansion module
MPC2E-3D-NG-Q Overview
The NG-MPC2 uses the latest programmable Junos Trio chipset, which features an upgraded CPU and increased memory to provide powerful routing, switching, and services capabilities, including line-rate forwarding, hierarchical quality of service (QoS), integrated video quality assurance, flow monitoring, load balancing, and Network Address Translation (NAT). Both modules support a complete set of Juniper Networks Junos operating system-based Layer 2, Layer 2.5, and Layer 3 features, and both host two Modular Interface Cards (MICs) for flexible high-density Ethernet and time-division multiplexing (TDM) network connectivity.
SKU: MPC2E-3D-NG-Q -
Juniper Expansion Modules
SRX-MP-LTE-AA Juniper Networks Mini-Physical Interface Module
SRX-MP-LTE-AA Overview
The Juniper LTE Mini-Physical interface Module (Mini-PIM) provides wireless WAN support on the SRX300 Series and SRX550 High Memory Service Gateways. This Mini-PIM contains an integrated modem and operates over 3G and 4G networks. It also supports up to two SIM cards and can be installed in any of the Mini-PIM slots on the services gateways.
SKU: SRX-MP-LTE-AA
