WIC-1DSU-T1 Cisco 1-port T1/FT1 CSU/DSU WAN Interface Card
$95WIC-1DSU-T1 Overview
Cisco 1-port T1/FT1 CSU/DSU WAN Interface Card. This Cisco 1-port T1/FT1 CSU/DSU WAN Interface Card includes high availability (HA) and redundancy features to ensure maximum uptime and availability of critical WAN connections. This includes two RJ-48 ports, allowing for redundant connections to the WAN. This means that if one port fails or goes down, the other port can take over to maintain connectivity. HSRP is a Cisco proprietary protocol that provides redundancy for IP networks. The WIC-1DSU-T1 can be configured to work with HSRP, allowing for automatic failover to a backup router in the event of a primary router failure.
WIC-1B-S/T-V3 Cisco Single Port WAN Interface Card
$204WIC-1B-S/T-V3 Overview
Cisco Single Port WAN Interface Card. The is a single port WAN Interface Card (WIC) manufactured by Cisco that supports Point-to-Point Protocol (PPP). PPP is a data link protocol that provides a secure and reliable connection between two network devices over a serial interface. It is widely used in WAN connections because it provides several advantages over other protocols. This provides data transfer rates of up to 8 Mbps synchronous and 16 Mbps asynchronous, which is higher than the WIC-1B-S/T. This means that the WIC-1B-S/T-V3 can handle more data traffic, resulting in improved network performance.
ASA-IC-6GE-SFP-C= Cisco ASA Interface Card Expansion module 6 ports
$4,799ASA-IC-6GE-SFP-C= Overview
Cisco ASA Interface Card Expansion module 6 ports. Cisco Interface Cards ASA 5545-X/5555-X Intf. Card 6-port GE SFP (SX,LH,LX) Spare Interface Cards for Cisco.
HWIC-1DSU-T1 Cisco Wan Interface Card Ethernet One-Port
$146HWIC-1DSU-T1 Overview
Cisco Wan Interface Card Ethernet One-Port. This Cisco belongs to the High-Speed WAN Interface Card (HWIC) family, designed to enhance the capabilities of Cisco routers. This particular modele focuses on Wide Area Network (WAN) connectivity and Ethernet integration. This is especially crucial for businesses and organizations requiring reliable and high-speed connections over large geographical distances. The T1 designation indicates compatibility with T1 lines, a common digital communication method.
VWIC3-2MFT-T1/E1 Cisco 2 Ports WAN Interface Card
$115VWIC3-2MFT-T1/E1 Overview
Cisco 2 Ports WAN Interface Card. The Cisco is a powerful and versatile 2-port interface card designed to meet the demands of modern communication networks. Specifically engineered for voice and Wide Area Network (WAN) applications, this multiflex trunk card provides seamless connectivity and high-performance features. Its efficient data transfer rates, scalability, and easy installation make it a valuable asset for those looking to enhance their communication infrastructure
VWIC3-4MFT-T1/E1 Cisco Multiflex Network Module Trunk WAN
$547VWIC3-4MFT-T1/E1 Overview
Cisco Multiflex Network Module Trunk WAN. This Cisco is a third-generation WAN Interface Card designed to enhance the capabilities of networking devices. Specifically, this module is equipped with four ports, each supporting T1 or E1 interfaces. The integration of multiple ports enables versatile connectivity options, making it a valuable component for organizations with diverse networking requirements.
WS-SVC-CMM-6T1 Cisco Catalyst 6500 Series Voice Interface Card Plug In Module
$463WS-SVC-CMM-6T1 Overview
Cisco Catalyst 6500 Series Voice Interface Card Plug In Module. This Cisco 6 Ports Voice Module is a network module that provides voice connectivity and services to Cisco switches. The module requires specific hardware and software requirements to operate correctly. This module has a maximum operating temperature of 40°C, and the ambient temperature should not exceed 45°C. Make sure that the module is installed in a well-ventilated area, and that there is proper air flow around the module.
WIC-1B-U-V2= Cisco 1 x Port ISDN/BRI Version 2 WAN Interface Card
$54WIC-1B-U-V2= Overview
Cisco 1 x Port ISDN/BRI Version 2 WAN Interface Card. This Cisco 1-Port WAN Interface Card (WIC) is a small, hot-swappable network interface module that can be installed into a Cisco router to provide connectivity to wide area networks (WANs). It supports a variety of WAN technologies and can be used in a wide range of applications.
WS-F6700-DFC3B Cisco Distributed Forwarding Card 3B Switching accelerator
$289WS-F6700-DFC3B Overview
Cisco Distributed Forwarding Card 3B Switching accelerator. This Cisco 1-port T1/FT1 CSU/DSU WAN Interface Card is a networking component that provides connectivity between a Cisco router and a T1 or fractional T1 (FT1) leased line. This Cisco 1-port T1/FT1 CSU/DSU WAN Interface Card provides scalability and expansion options for growing network needs.
WIC-1B-U-V2 Cisco 1 x Port ISDN/BRI Version 2 WAN Interface Card
$54WIC-1B-U-V2 Overview
Cisco 1 x Port ISDN/BRI Version 2 WAN Interface Card. This Cisco 1-Port WAN Interface Card (WIC) is a small, hot-swappable network interface module that can be installed into a Cisco router to provide connectivity to wide area networks (WANs). It supports a variety of WAN technologies and can be used in a wide range of applications.
WIC-1B-S/T Cisco V3 Single Port ISDN WAN Interface Module Card
$153WIC-1B-S/T Overview
Cisco V3 Single Port ISDN WAN Interface Module Card. This Cisco 1-Port WAN Interface Card is a type of interface card used to connect WAN devices to Cisco routers. Like any other networking device, This Cisco 1-Port WAN Interface Card can encounter common issues that need to be resolved. It can support data transfer rates of up to 1.544 Mbps for T1 lines and 2.048 Mbps for E1 lines. It also supports various line coding schemes and framing formats used by different WAN technologies.